Archive for July, 2012

Tips for the Motorcycle Passenger

colorado motorcycle training, Motorcycle training | Posted by admin July 20th, 2012

by Chuck Hawks | chuckhawks.com

Riding on a motorcycle with a friend is one of the most fun things you can do. It can be an even more enjoyable experience if the passenger understands and follows a few simple rules. To be the kind of passenger riders want to ride with, remember the following:

1. Wear clothing that will give you some protection in the unlikely event of a spill. As a minimum, you should wear the following to protect yourself:

  • Footwear that protects your feet and your ankles (hiking boots are good).
  • Durable pants–leather is best; lacking leather, you will have to make do with jeans, work pants, or something similar.
  • An abrasion resistant jacket that zips or buttons up close to the neck (again, leather is best if you have it; a nylon flight jacket or parka are satisfactory, and a Levis-type jacket will do in a pinch).
  • Durable gloves.
  • Eye protection–ideally, the helmet you borrow or own should have a face shield for comfort as well as protection. If it does not, goggles are good, and glasses (dark or prescription) will do.

2. You should also attempt to dress appropriately for the weather. If you have not ridden very much, you probably do not realize how hot or how cold it can be on a motorcycle. If it is hot, it will feel a lot hotter while you are riding; if it is cold, it will feel a lot colder while you are riding. Ask the rider for advice about dressing for the anticipated conditions, but don’t compromise your minimum level of protection as described above.

On hot sunny days, one trick is to wear an extra large white shirt over your jacket. It will reflect a lot of heat and help keep you cool. In general, it is easier to dress safely and comfortably for a cool day than for a hot one. Lastly, don’t wear anything loose and floppy (like a long scarf or bell bottom pants) that could get caught in the rear wheel, sprockets, drive chain or belt, or any other moving part of the motorcycle. You could injure yourself, and might cause an accident.

3. Wear a securely fastened helmet that fits properly. Most riders have extra helmets and will be glad to loan you one. A helmet should be a snug fit; it should not be possible to twist it around on your head. The strap should be pulled as tight as you can get it. You can test for fit, and to see if the strap is tight, like this: grasp the chinbar of a full coverage helmet, or the edge of an open face helmet directly over your forehead, and try to pull the helmet backwards off your head. If the helmet winds up on the back of your head, tighten the strap or get a helmet that fits.

The rider can show you how to put on your helmet properly and easily (you kind of roll it onto your head from the front). If you ride often, you will eventually want to buy your own helmet. Just about any motorcycle shop can help you pick out a suitable helmet that fits you correctly.

4. Before you attempt to mount the motorcycle, make sure that the passenger footpegs are down. (They fold up when not in use, and it is easy for the rider to forget to put them down for you.) If you don’t know where the footpegs are, have the rider point them out to you.

Also, beware of the hot exhaust pipes. Make sure you know where they are, and don’t let your leg or any part of your body touch them as you mount or dismount the motorcycle. They can give you a severe burn right through the heaviest pants.

5. It is customary to get on or off the motorcycle from the left side. Always wait for the rider to tell you it’s okay to mount or dismount. If you start to clamber on (or off) when the rider does not expect it, the sudden motion of the motorcycle will be disconcerting. You could even pull the motorcycle over, a big no-no.

6. Here is the best way to get on a motorcycle, and the method almost all passengers should use: extend your right leg over the seat, and then slide gently up onto the seat. Put your feet on the footpegs and you are onboard!

If you are not able to do that because you are a tiny person or a child, this will work: put your left foot on the left passenger foot peg, lean your body way over the motorcycle, and gently step up until you can swing your right leg over the seat and ease yourself down. You must keep your body low and lean over the motorcycle as much as possible while you get on, to help the rider keep the motorcycle balanced. The weight of your body, if it is too far out of line with the weight of the motorcycle, could pull the bike over, still a big no-no.

A person reasonably close to normal size (male or female) should not need to use this method to mount a motorcycle, and a heavy person should not attempt it under any circunstances. It is all a question of balance; the rider is not strong enough to force a big motorcycle to stay upright if you cause it to get out of balance.

To dismount, just reverse the process you used to get on. With a little practice, getting on and off will become second nature.

7. Once you are on the motorcycle, plant your feet on the passenger footpegs and keep them there. You absolutely do not want to bring your foot into contact with the rear wheel, drive chain or belt, or the hot muffler. Never attempt to help the rider hold the bike upright when it is stopped. Keep your feet safe by keeping them on the foot pegs at all times.

8. Place your hands on the rider’s hips. That is the best way to hold on to the rider, and it keeps you in touch with the rider’s movements. Keep your weight centered over the motorcycle. Try not to move around any more than is necessary, particularly when the motorcycle is stopped, as it affects the balance of the motorcycle.

9. Motorcycles turn by leaning (banking like an airplane), not by steering like a car. So don’t be alarmed when the motorcycle leans over to go around a corner. To position yourself perfectly for a turn, just look over the rider’s shoulder in the direction of the turn. If the motorcycle is turning right, look over the rider’s right shoulder; if it is turning left, look over the rider’s left shoulder.

You don’t have to do anything else; looking naturally over the rider’s inside shoulder will automatically put your weight right where it belongs in a turn. Keep your body in line with the rider’s body to prevent the motorcycle from leaning more than the rider intends. (When going straight, it doesn’t matter which shoulder you look over.) Never lean out of a turn; you could cause an accident that way, which is another big no-no.

10. When the rider puts on the brakes, it causes a forward weight transfer. If the rider is forced to break hard, as in an emergency, this forward weight transfer is very apparent; you will be forced against the rider, and you will start to slide forward on the seat. Don’t panic. Try to keep back, away from the rider. Resist sliding forward by pressing your feet against the footpegs; use your thigh muscles to control your position on the seat.

If you slide forward, you force the rider forward, reducing the rider’s control over the motorcycle. It also moves the weight distribution of the motorcycle forward, reducing the weight on the rear tire and therefore the traction of the rear tire, making it more likely that the back tire will start to skid. Obviously, none of this is desirable.

11. You can be an active participant in the ride by staying alert and being prepared. Help the rider look for potential danger, and be prepared to hang on and hold yourself back if you anticipate a need for sudden braking. Likewise, if the rider is forced to swerve the motorcycle to avoid a hazard in the road, you need to be prepared for the sudden lean and change of direction.

You can also help the rider scan for animals that may run into the road. Dogs and deer are particularly unpredictable, and you may see a deer on a hillside above the road, or a dog in somebody’s front yard, before the rider. (After all, the rider is concentrating primarily on the road.) If you spot a hazard of any sort that you think the rider is unaware of, rap the rider on the appropriate shoulder, and point at the hazard in a way that brings it to the rider’s attention.

#

Ricky Orlando’s Motorcycle school is the ideal place to learn how to ride motorcycles. Our classes appeal to novice and advanced bikers as well as covering everything in-between. We provide top class motorcycle training in Colorado. Contact us today!

Visit http://www.rickyorlando.com for further information about Colorado motorcycle training, Colorado motorcycle classes, and motorcycle training Colorado.

Taking a Street Rider Training Course

colorado motorcycle training | Posted by admin July 5th, 2012

by Clinton Smout | ridersplus.com

It’s the time of year when the street rider training programmes are starting up again. Thousands of new riders will sign up soon for their novice rider training programme. After teaching the course for 23 years, I would like to offer a few tips that may help new riders get the most out of the experience.

How to find a novice rider training programme in your area.

Ask at local motorcycle shops, your provincial or local ministry of transportation or google “street rider training programmes” for your area.

When to book.

If you live in a State that has a non-riding season (winter), you probably will not be able to practice your newly acquired riding skills in the snow. The best time to sign up for a course is the spring or summer, that will allow you time to put your basic skills to use while they are fresh. (Assuming you get a motorcycle right after your course).

What do you need.

Each course will have specific demands so check with them first, but it’s very common that the student is expected to bring:

  • Your own riding gear including a certified helmet in good safe condition, a sturdy jacket, full fingered gloves, sturdy pants, low heeled boots that cover the ankle. Eye protection may not be mandatory, but suggested.
  • Paperwork: your current license documents and all registration papers you have received from the program.
  • Directions to the course including the course timing agenda. You don’t need the stress of being lost or late. Lessons start on time and successful completion of the course means being present for all of the lessons.

How to prepare for a novice rider training course.

Sleep.
Get lots of it before your course and after each day’s training. Most students comment after the first day of training that they had no idea they would be so tired. You will be using muscle groups you don’t normally use. Concentrating on new riding tasks and concepts is also mentally fatiguing so you will need all of your brain cells. You may want to wait for the celebration party until after your course is over.

Attitude.
Regardless of your past riding experience, it’s best to go into your course with an open mind. If you have plenty of riding experience, you might have some ingrained bad habits that won’t fit into the safety theme ofthe course. Your old Uncle Joe’s well–meaning advice about never using the front brake is wrong. The curriculum from your course is best to follow for the basics. Instructors following the course curriculum to the letter may try to break you of habits like riding with one or two fingers over the levers. If your braking skills are fine it shouldn’t matter how many fingers you use, but some instructors may not see it that way. Smile and nod is the suggestion to politically get along with everyone.

Are you nervous?

Often novice students freak themselves out by worrying too much. Will everyone else be better than me? Will I fit on the training bikes? Am I too old to start this sport (like some ofmy co-workers and family have insinuated).

A good novice curriculum is just that, it’s designed for the absolute beginner. I used to tell the novice students on the first night of the classroom that they were lucky to not have any bad riding habits. I also used to remind them that we often judge how well we are doing by comparing our progress with that of others.

Do you doubt your ability before you even start the course?

Unfortunately, I have met many students who came to the course with the stigma of ‘I won’t be good at this’. Hopefully, you have riders in your life who are really supportive of your dream of riding. Whenever you doubt yourself, I want you to remember that the greatest percentage of riders are male. For the women out there, how hard can it really be if they can do it?

There will be a wide range of students in both age and ability. Some of the students will ride their own motorcycle to the course (obviously with much more than novice ability). Beside you, in your group could be a teenager who grew up on a dirt bike. If you compare your skill acquisition and riding ability in the lessons with others in your group, you may become depressed. I suggest that you put it into perspective. Of course some students in your group will be better than you, but worry about yourself. Who cares what they think of your riding? You are probably never going to see them again. I used to say to the students who wanted to quit and go home “How do you think you would be doing if you were the only student here today?” Good instructors will do their best to help coach you through any riding challenges you face while keeping the already skilled riders challenged in the lessons. Instructors know that we all learn at different rates and they won’t get impatient if it takes you a little longer to grasp the skill requirement. Your job is to give yourself a break. Relax and have fun and you will actually learn much more.

What happens if you crash?

No problem. The training course is the perfect place to crash. You will have more safety equipment on than many of you will wear on your own bike. The speed you will be going will most likely be very slow (tip-overs are the most common crash at the training course). There will be no cars or trucks on the training site. The largest vehicle will be another training motorcycle. First aid will be right there since all the staff should be certified. Hey, and most importantly… it’s not your bike. If it is really crashed up they will just go get you another one.

The test.

Courses across America will have a different test delivery system depending upon State laws and regulations.

Is the test hard?

It’s all relative to your experience and how you handle things like test anxiety. I have seen novice students who did very well during the lessons, but they fall apart during the test. Don’t think of it as a test. It is simply the last exercise of the course where you will ride around showing someone with a clipboard and stopwatch the same thing you have shown your instructors all weekend. Nothing on the test will be a surprise. Most curriculums will demand more of your riding abilities during the lessons. The test demands will be easier than the lessons. Don’t give up if you think you have done poorly in one section of the test. Your score is cumulative, so don’t stop or give up until you are told to.
Before you take off on the test, be sure that the fuel petcock is on and your helmet is done up properly.

What happens if you are not successful the first time?

Yes it is disappointing, but it does mean that you need some more practice before you will be safe on the road. Failing can be due to touching or crossing test section painted lines, riding too slowly in exercises and/or dropping the motorcycle.

Remember the real test is out on the roads with other traffic. On a positive note, it means you willget more time on a small bike and perhaps some additional training before your retest.

How can you prepare for your riding course?

If there is a motorcycle at home you can sit on it and develop muscle memory in certain control operations. Many novices struggle with finding the basic control levers without looking at them. Muscle memory is being able to move your body parts to the motorcycle parts you need without looking. You don’t even have to start up the bike at home to practice the following:

  • Rear brake: practice moving your right foot from the foot peg to the rear brake pedal and back.
  • Front brake: practice rolling off the throttle (right hand moving forward) as you reach out and gently apply the front brake lever. Gentle and progressive application of the front brake lever is a very important skill to develop. You never want to grab the front brake lever abruptly.
  • Shifting gears: You can practice shifting by following some tips. Look at your hand (palm down). Your thumb position could simulate first gear. Neutral is between your thumb and the next finger. We teach shifting gears in three simple steps. Wringing the towel, pretend you are holding a wet towel in your hands. Wring the water out by squeezing your left hand in and rolling your right hand forward. This analogy will help learn the muscle memory of pulling the clutch (left lever) in and rolling the throttle off.
  • Step One: Wring the towel. (Left hand pulling in the clutch lever unhooks the engine from the rear wheel and the right hand rolls to shut off the throttle)
  • Step Two: Shift either up or down on the shifter with your toe.
  • Step Three: Wring the towel again (the opposite of above in step 1–release the clutch to hook up the driveline to the rear wheel and roll on the throttle.)

Some practice doing this will really help you get used to gear shifting by already having the muscle memory of finding the gear shifter without looking down at your foot.

Note: if you have a bicycle the standard setup is that the right handlebar brake lever operates the rear brake and the left lever is normally your front brake. If you have years of bicycle riding under your belt, you must now remember that the motorcycle front brake lever is on the right handlebar, the opposite of your bicycle.

A bicycle can actually help you prepare for your motorcycle course. Practice some slow speed turns by setting up some pop cans or something that can mark out a right angle turn (90–degree turn). The secret to negotiating a tight turn on a bicycle is the same as a motorcycle. Maintain some momentum and look where you want to go. Go into the right hand turn a little wide. You will find that the back wheel will turn at a sharper angle in a turn than the front wheel will. To avoid crossing any lines (which simulate curbs) in tight test turns, make sure your front wheel turns wide enough to get your rear wheel around the turn. Just riding slowly and turning will help you practice maintaining your balance.

Riding with your new license.

More practice is needed. You probably will buy a larger bike than the one you used in your training course. A different bike will handle, brake and accelerate differently. Find a safe spot to practice your slow speed control, braking, swerving and cornering skills. Taking your new big bike into very busy traffic on the day after your course may not be wise. Light, easy traffic is best. Going out for your first few rides with an understanding more experienced friend or loved one is a good idea. I would have them ride shotgun behind you instead of riding in front. If you have two pals that will help, put yourself in the middle (riding in the staggered formation).

Ride at your own pace.
Many accidents are caused by new riders trying to keep up with more experienced riders.

Don’t take passengers.
Their life is in your hands. Make sure you are very comfortable with riding before you add the extra challenge of a passenger, which changes the handling characteristics of the bike.

Don’t switch bikes with friends.
Take all the time you need as a new rider to get used to your own bike. Ride safely!

#

Ricky Orlando’s Motorcycle school is the ideal place to learn how to ride motorcycles. Our Colorado motorcycle training classes appeal to novice and advanced bikers as well as covering everything in-between. Whether you enjoy competing for that top spot in Daytona or the wind blowing through your hair as you take a casual motorcycle ride through the Rocky Mountains.

Visit our website: http://www.rickyorlando.com, to learn more about Colorado motorcycle classes, Denver motorcycle classes, and Colorado motorcycle training.